LCR Serie
La serie LCR es la primer versión de la serie LCA. El actuador está disponible con un servomotor sin escobillas de mando directo. Está diseñado con una guía lineal lubricada para ofrecer una larga vida útil. Es programable en fuerza y "Soft-Land". Control absoluto sobre: Fuerza/torque, posición, aceleración y velocidad.
- Soft-Land
- MTBF 100 million life cycle
- Vacuum through shaft prevents dust accumulation
| Actuator Models | Single Axis Controller | Dual Axis Controller | |||||
| Model | Phase | VLCI-X1 | VLC-ETC | VLC-1H-07/13 | VLC-1-EIP | VLC-25-07/13 | VLC-25-EIP |
| LCR13/LCR16/LCR20 (Under 25mm stroke) |
Linear: Single (Brush) Rotary: Multi (Brushless) |
MAH-6RED226-03 (with 2 controllers) |
MAH-4RED226-03 (with 2 controllers) |
MAH-4RTD226-03 | |||
| LCR13/LCR16/LCR20 (35mm stroke and above) |
Linear & Rotary: Multi (Brushless) |
MAH-6RED026-03 (with 2 controllers) |
MAH-4RED026-03 (with 2 controllers) |
MAH-4RTD026-03 | |||
Linear encoder resolutions: 5µm standard, 1µm and 0.1µm optional for most units. Consult factory for availability.
Shaft ends: Male, Female, Blank and Custom (check availability of custom option)
Return spring: Prevents the shaft from dropping during vertical operation when power is cut.
Vacuum: For pick and place applications
Extended nose bushing: For tighter shaft run-out and higher side load onto the shaft.
Increase of max. force and acceleration: 48 volt coil and double coil options are available for some units with 24 volt single coil.
Increase of torque/gear ratio: Alternative geared motors are available. Please consult factory.
Rotary encoder resolution: Consult factory for higher resolution.
