LCA 系列
利用移动线圈技术研发新世代的伺服马达。LCA系列使用零件精简的组合式设计，可有效的控制累积公差，并确保产品的质量以及价格上的优势。
该系列在高速运用上寿命循环可达超过1亿次。尺寸轻巧高度只有8mm，最适合用于取放运用或一些高速循环力量可达90牛顿的运用。 所有SMAC的 LCA系列致动器都可编辑位置、速度以及力量程序且可反馈。独特的 软着陆功能可以更精准的控制力量。
- 性价比高
- 内建自润式机制长寿命可超过1亿次循环寿命
- 高循环和高加速度
- 力量、位置以及速度控制
- 有IP65供选择
- 高效节能：低消耗功率，平均1.5安培 24伏特或48伏特
- 安静且干静的运行
- 资料反馈
| Actuator Models | Single Axis Controller | Dual Axis Controller | ||||||
| Model | Phase | VLCI-X1 | VLC-ETC | VLCI-CAN-07 | VLC-1-EIP | VLC-1-07/13 | VLC-25-07/13 | VLC-2-EIP |
| LCA(S)/LCB/MLA | Single (Brush) | VAH-6LOD26-03 | VAH-4LOD26-03 | |||||
| LCA(S) | Multi (Brushless) | MAH-6LOD26-03 | MAH-4LOD26-03 | |||||
| 2x LCA(S), 2x LCB | Single (Brush) | VAH-4LTD26-03 | ||||||
| 2x LCA(S) | Multi (Brushless) | MAH-4LTD26-03 | ||||||
Linear encoder resolutions: 5µm standard, 1µm, 0.5µm and 0.1µm optional for most units. Consult factory for availability.
Shaft ends: Male, Female, Blank and Custom (check availability of custom option)
Return spring: Prevents the shaft from dropping during vertical operation when power is cut.
Vacuum: Vacuum through the shaft or on the shaft for pick and place applications.
Extended nose bushing: For tighter shaft run-out and higher side load onto the shaft.
Increase of max. force & acceleration: 48 volt coil and double coil options are available for some units with 24 volt single coil.
Increase of force accuracy & lifetime: Extra long life linear guide / Low friction linear guide
