Bottle Fill Line: High Speed Pressure/Leak Detector System

Product used: LAL95 series linear

Problem: The current method for leak detect has been tapping on the top of lid and sensing the pressure. This is difficult technique with low accuracy.

Solution: Sense side of bottle, push with specific force and determining the movement to determine pressure in bottle. This is primarily in bottles pressurized by nitrogen filled bottles (soda, etc) where they are more solid. If there is a leak the spring back is greater. The cycle rate is 20 Hz. Since the SMAC actuator can sense the surface, apply programmable force and monitor position of movement we are a game changing solution.

 

 

 

 

Beyond Bottles: This same solution can be used for soft pouch packaging such as contact lenses or coffee "pods."

 

 

 

 

 


 
Los sitios web de SMAC usan medios de rastreo tales como "cookies". Al usar alguno de nuestro sitios web, usted esta de acuerdo
con nuestra Política de Privacidad al igual que nuestros Términos y Condiciones, incluyendo nuestra Política sobre el uso de Cookies. Estoy de acuerdo.
©2019 SMAC Corporation | 5807 Van Allen Way | Carlsbad, California 92008
Tel: 760-929-7575 | Fax 760-929-7588

Copyright © 2019 SMAC Corporation

Pregunte a un ingeniero

*Nombre:


*Correo electrónico


*Teléfono


*Código postal


*Su pregunta
Por favor responda la siguiente pregunta:
¿Que es 2 + 2?