LAL Series Linear Actuators

Linear Actuators Lal Series

SMAC's original series of linear actuators with stroke 5mm to 150mm. Standard resolution is 5µm with 1µm, 0.5µm and 0.1µm options available on most models.

Features
  • Programmable speeds, positions and forces
  • Soft-Land capability and precise force control
  • High cycle
  • Data feedback
  • Airless & clean operation
  • Spring and vacuum option available
Actuator Models Single Axis Controller Dual Axis Controller Amplifier Smart Driver
  LAC-1 LCC-10(11) LAC-26 LAC-25 LAA-5 LAD-1
LAL35/LAL95 LAH-LOD26-03 LAH-LOD26-03 - - LAH-LAD26-03 LAH-LSD26-03
LAL55/LAL300/LAL500 LAH-LOD-03 LAH-LOD-03 - - LAH-LAD-03 LAH-LSD-03
2x LAL35/LAL95       LAH-LTD26-03    
2x LAL55/LAL300/LAL500       LAH-LTD-03    

* Also need a jumper cable LAH-PT30-26 

Linear encoder resolutions: 5µm standard, 1µm, 0.5µm and 0.1µm optional for most units. Consult factory for availability.

Shaft ends: Male, Female, Blank and Custom (check availability of custom option)

Return spring: Prevents the shaft from dropping during vertical operation when power is cut.

Vacuum: Vacuum through the shaft or on the shaft for pick and place applications.

Extended nose bushing: For tighter shaft run-out and higher side load onto the shaft.

Increase of max. force & acceleration: 48 volt coil and double coil options are available for some units with 24 volt single coil.

Increase of force accuracy & lifetime: Extra long life linear guide / Low friction linear guide


 
©2017 SMAC Corporation | 5807 Van Allen Way | Carlsbad, California 92008
Tel: 760-929-7575 | Fax 760-929-7588

Site Credits: Ecreativeworks