Discontinued Models

The following products have been discontinued, or will be discontinued. Please contact your local SMAC representative to obtain a suitable replacement.

Electric Cylinders | Linear Actuators | Linear Rotary Actuators | Grippers | Controllers

Part No* Description PDF CAD
Electric Cylinders
CAL12-010-51-1 CAL12 Series Electric Cylinder, 12mm dia., 10mm stroke, 24 volts, single phase, 1 micron encoder, single coil file_pdf cad_icon
CAL35-015-55 CAL35 Series Electric Cylinder, 35mm dia., 15mm stroke, 24 volts, single coil    
CAL35-015-65 CAL35 Series Electric Cylinder, 35mm dia., 15mm stroke, 24 volts, double coil    
CAL35-025-55 CAL35 Series Electric Cylinder,  35mm dia., 25mm stroke, 24 volts, single coil    
CAL35-025-65 CAL35 Series Electric Cylinder, 35mm dia., 25mm stroke, 24 volts, double coil    
CAL35-050-55 CAL35 Series Electric Cylinder, 35mm dia., 50mm stroke, 24 volts, single coil    
CAL36-005-55 CAL35 Series Electric Cylinder, 36mm dia., 5mm stroke, 24 volts, single coil    
CAL36-015-65-2 CAL36 Series Electric Cylinder, 36mm dia., 15mm stroke, 24 volt, double coil file_pdf  
CAL36-015-55-1 CAL36 Series Electric Cylinder, 36mm dia., 15mm stroke, 24 volt, single coil file_pdf  
CAL36-015-75-2 CAL36 Series Electric Cylinder, 36mm dia., 15mm stroke, 48 volt, double coil file_pdf  
CAL36-025-55-2 CAL36 Series Electric Cylinder, 36mm dia., 25mm stroke, 24 volt, double coil file_pdf cad_icon
CAL36-025-55-1 CAL36 Series Electric Cylinder, 36mm dia., 25mm stroke, 24 volt, single coil file_pdf cad_icon
CAL36-050-55-1 CAL36 Series Electric Cylinder, 36mm dia., 50mm stroke, 24 volt, single coil file_pdf cad_icon
CAL75-015-55-1 CAL75 Series Electric Cylinder, 75mm dia., 15mm stroke, 24 volt, single coil file_pdf cad_icon
CAL75-015-75-1 CAL75 Series Electric Cylinder, 75mm dia., 15mm stroke, 48 volt, single coil file_pdf cad_icon
CAL75-025-55-1 CAL75 Series Electric Cylinder, 75mm dia., 25mm stroke, 24 volt, single coil file_pdf cad_icon
CAL75-025-75-1 CAL75 Series Electric Cylinder, 75mm dia., 25mm stroke, 48 volt, single coil file_pdf cad_icon
CAL75-050-55-1 CAL75 Series Electric Cylinder, 75mm dia., 50mm stroke, 24 volt, single coil file_pdf cad_icon
CAL75-050-75-2 CAL75 Series Electric Cylinder, 75mm dia., 50mm stroke, 48 volt, double coil file_pdf cad_icon
CAL75-050-75-1 CAL75 Series Electric Cylinder, 75mm dia., 50mm stroke, 48 volt, single coil file_pdf cad_icon
CAS35 series CAS35 Series Cylinder Linear Slide Actuator, 36mm dia.    
CBR100-050-35-12 CBR100 Series Electric Cylinder Linear & Rotary, 100mm dia., 50m stroke, 48 volts, multi phase, 5 micron encoder, 12 coil (Standard HT35 motor, 20K rotary encoder, gearbox options available.) file_pdf cad_icon
CBR100-100-35-12 CBR100 Series Electric Cylinder Linear & Rotary, 100mm dia., 150m stroke, 48 volts, multi phase, 5 micron encoder, 12 coil  (Standard HT35 motor, 20K rotary encoder, gearbox options available.) file_pdf  
CBR100-150-35-12 CBR100 Series Electric Cylinder Linear & Rotary, 150mm dia., 150m stroke, 48 volts, multi phase, 5 micron encoder, 12 coil  (Standard HT35 motor, 20K rotary encoder, gearbox options available.) file_pdf  
CBR100-300-35-12 CBR100 Series Electric Cylinder Linear & Rotary, 300mm dia., 150m stroke, 48 volts, multi phase, 5 micron encoder, 12 coil  (Standard HT35 motor, 20K rotary encoder, gearbox options available.) file_pdf  
Return to top of page.
 
Linear Actuators
LAL10-005-55-1 LAL10 Series Linear Actuator, 5mm stroke, 24 volts, single coil file_pdf  
LAL15-015-55-1 LAL15 Series Linear Actuator, 15mm stroke, 24 volts, single coil file_pdf cad_icon
LAL20-010-55-1 LAL20 Series Linear Actuator, 10mm stroke, 24 volts, single coil file_pdf cad_icon
LAL20-015-55-1 LAL20 Series Linear Actuator, 15mm stroke, 24 volts, single coil file_pdf cad_icon
LAL20-015-55-2 LAL20 Series Linear Actuator, 15mm stroke, 24 volts, double coil file_pdf cad_icon
LAL20-025-55-1 LAL20 Series Linear Actuator, 25mm stroke, 24 volts, single coil file_pdf cad_icon
LAL20-025-75-1 LAL20 Series Linear Actuator, 25mm stroke, 48 volts, single coil file_pdf cad_icon
LCA25-025-55-1 LCA25 Series Linear Actuator, 25mm stroke, 24 volts, single coil, 5 micron encoder    
LCA25-025-75-1 LCA25 Series Linear Actuator, 25mm stroke, 48 volts, single coil, 5 micron encoder    
LCB25-010-75-3 Linear Actuator, 10mm stroke, 48 volts, single phase, 5 micron encoder, 3 coil    
LCB25-015-55-2 Linear Actuator, 15mm stroke, 24 volts, single phase, 5 micron encoder, double coil    
LCB25-015-75-2 Linear Actuator, 15mm stroke, 48 volts, single phase, 5 micron encoder, double coil    
LCB25-025-75-2 Linear Actuator, 25mm stroke, 48 volts, single phase, 5 micron encoder, double coil    
Return to top of page.
 
Linear Rotary Actuators
LAR15-015-55-1 LAR15 Series Linear Rotary Actuator, 15mm stroke, 24 volts single phase, 5 micron encoder, single coil file_pdf cad_icon
LAR20-015-55-1 LAR20 Series Linear Rotary Actuator, 15mm stroke, 24 volts single phase, 5 micron encoder, single coil file_pdf cad_icon
LAR31-017-55CVS LAR31 Series Linear/Rotary Actuator, 17mm stroke, 24 volts, single coil    
LAR34-025-55 As LAR30-25 + vacuum, spring & 20K rotary encoder    
       
LCR16-015-65 LCR16 Series Linear Actuator, 15mm stroke, 24 volts, double coil, 5 micron encoder    
Return to top of page.
 
Linear Slide Actuators
LAS15-015-55-1 LAS15 Series Linear Slide Actuator, 15mm stroke, 24 volts single phase, 5 micron encoder, single coil file_pdf cad_icon
LAS20-010-55-1 LAS20 Series Linear Slide Actuator, 10mm stroke, 24 volts single phase, 5 micron encoder, single coil file_pdf cad_icon
LAS20-015-55-1 LAS20 Series Linear Slide Actuator, 15mm stroke, 24 volts single phase, 5 micron encoder, single coil file_pdf cad_icon
LAS20-025-55-1 LAS20 Series Linear Slide Actuator, 25mm stroke, 24 volts single phase, 5 micron encoder, single coil file_pdf cad_icon
LAS20W-025-55-2 LAS20W Series Linear Slide Actuator, 25mm stroke, 24 volts single phase, 5 micron encoder, double coil file_pdf cad_icon
Return to top of page.
 
Grippers
GRP20-010-51-1 Gripper, 10mm opening total (5mm per each jaw), 24 volts single phase, 1 micron encoder, single coil file_pdf cad_icon
Return to top of page.
 

 

Controllers
Part No DescriptionD DocumentationD Software
LAC-1 High speed single axis controller with built-in amp

LAC-1 rev.2_Outline drawing  file_acrobat

LAC-1 rev.2 CAD drawing  cad_icon

LAC-1 Manual 2.0  file_acrobat

LAC-1 Pinout  file_acrobat

SMAC LAC-X Editor Quick Start Guide 1.01  file_acrobat

LAC-1D Outline drawing  file_acrobat

SMAC LAC-X Editor 1.4
Easy setup and tuning of control parameters for LAC-1, LAC-25, LAC-45 and Smart Driver.

LAC-25 High speed dual axis controller with built-in amp and AMC drive

LAC-25 Outline drawing  file_acrobat

LAC-25 CAD drawing  cad_icon

LAC-25 Manual rev 4.1  file_acrobat

LAC-25 Pinout  file_acrobat

SMAC LAC-X Editor Quick Start Guide 1.01 

SMAC LAC-X Editor 1.02
Easy setup and tuning of control parameters for LAC-1, LAC-25, LAC-26, LAC-45 and Smart Driver.
LAC-45 As above but 4-axis

LAC-45 Outline drawing  file_acrobat

LAC-45 Manual  file_acrobat

SMAC LAC-X Editor Quick Start Guide 1.01 

SMAC LAC-X Editor 1.02
Easy setup and tuning of control parameters for LAC-1, LAC-25, LAC-45 and Smart Driver.
LAC-15 Single axis controller c/w built in amp    
LAC-20 2 axis controller c/w built in amp    
LCC-10





LCC-11
Single axis brushless controller built-in amplifier, 10 bit analogue output


Single axis brushless controller built-in amplifier, 16 bit analogue output

LCC-10 Outlind Drawing  file_acrobat

LCC-10 CAD Drawing cad_icon

LCC-10 Controller Manual   file_acrobat

SMAC Control Center installation Instructions file_acrobat

SMAC Control Center Get Started Manual  file_acrobat
How to use SMAC Control Center quick and efficient.

SMAC Control Center Training v1.2 file_acrobat
Full training manual for the SMAC Control Center. The Exercise solutions can be found in the Motion Samples tab of this site

Embedded Motion Control Library  file_acrobat
All commands of the LCC10 and LCC11 controller.

Motionlab manual  file_acrobat
How to use MotionLab Software.

Composer manual  file_acrobat
How to use Composer Software.

Firmware Loader manual  file_acrobat
How to use the Firmware Loader Software.

Technical Notes:
Measuring forces with LCC file_acrobat
Control Tuning file_acrobat
Serial to PC/PLC file_acrobat
Homing file_acrobat
Soft-Land  file_acrobat
Analog I/O file_acrobat
Phase Detection file_acrobat
Interrupt file_acrobat
I2T file_acrobat
Reset Error file_acrobat
Write to Non Volatile file_acrobat
Back EMF file_acrobat
Broken Wire Detection file_acrobat
Spring compensation file_acrobat

LCC Control Centre V2.4
LCC Control Center V2.4 has the functionality of SMAC control center V1.4 plus some variables to enable the use of the added features of firmware version 2.0. The extension of the program files of the LCC control center V2.4 is ".LCC" but the file content is compatible with the ".SCC" files of SMAC control center V1.4. The added features in firmware version 2.0 are spring compensation, unpush macro feature, copy protection bit & output mode automatic.

 

LCC Control Center 2.4RR

LCC Control Center 2.4 RR(Reduced Resolution) should be used *only when the resolution of the GUI is bigger for the user's computer (When Front end display is incomplete in the GUI for the user's computer)



MotionLab V1.8.1.0
Motion-Lab offers the ability to edit all parameters in a configuration file for an LCC10 or LCC11. Editing and Tuning of config file parameters can be best done in the Smac Control Center (Tuning). Only for special cases Motion-Lab can be usefull. If you use Motion-Lab it is best to start with a basic config files which you can find in the Config files tab.

Composer V1.2.3.0R
Composer is used to program an application for an LCC10 or LCC11 in combination with a SMAC Actuator. It is for the advanced motion programmer and is only used for special cases. Normally the SMAC Control Center is the best way of creating a program. Before running a program a configuration file of the actuator needs to be loaded into the controller.

Firmware Loader V1.1.11.0R
Firmware Loader is used to load new firmware into the controller. The latest version of the firmware can be found at the Firmware Tab

MAAC-4-7 Multi Axes (4) Galil based controller: Four Axes controller brushed/ brushless, integrated high end amplifier, advanced Math capability, Circular Interpolation, Teach Path Function, additional controllers can be added to work together on systems requiring more than 4 axes. Ethernet Interface, RS-232 Interface, 8 TTL I/O’s    
LAT-26C-0001-03 LAC-15 to LAL/S 3-Phase Actuator, DB26 Pin    
LAT-26C-0002-03 LAC-20 to LAR 3-Phase Actuator, DB26 Pin    
LAT-26C-0003-03 LAC-20 to Two LAL/S or CA Actuators, DB26 Pin    
LAT-26C-0004-03 LAC-15 to LAL/S or CA Actuator, DB26 Pin    
LAT-26C-0005-03 LAC-20 to LAR Actuator, DB26 Pin    
Return to top of page.
 
 
Narrow Your Results By
X
Ask a Question
*Your Name:


*Email:


*Phone:


*Postal Code


*Question:
SMAC sites use cookies and similar technologies. By using SMAC sites, you are agreeing to our revised Privacy Policy and Terms of Service, including our Cookie Policy. I Agree