Multiple Gauging | Automotive Parts

Wheel Bearing Measurements

  • Measurement of multiple Gauging All Threads (M14 & M6)
  • Gauging Major Bore Diameter, Groove Location, Width, Diameter In Major Bore
  • Gauging ABS Sensor Bore Diameter Depth, Location of step
  • Check for Chamfer on M14 Threaded Holes
  • Check for Run out  and wall thickness on Major Diameter
  • Checking location of all four M14 threaded holes (Go/ No Go)

Product used:

Other QC Applications

  • Shallow Tap
  • Undersize / oversize Thread
  • Chamfer depth
  • Cycle time <2 seconds
  • Multiple heads to be checked

©2018 SMAC Corporation | 5807 Van Allen Way | Carlsbad, California 92008
Tel: 760-929-7575 | Fax 760-929-7588

Site Credits: Ecreativeworks